# Blackbox > Open-source ESP32-C3 vehicle telemetry: GPS + WT901 IMU, Rust sensor fusion, browser dashboard, circuit/stage lap timing, and local recordings. ## Project - [Website and USB installer](https://jctoledo.github.io/blackbox/): project overview and verified published firmware installation. - [Source repository](https://github.com/jctoledo/blackbox): maintained code, README, issues, and contribution history. - [Releases](https://github.com/jctoledo/blackbox/releases): published firmware; releases can lag main. ## Documentation - [Lap timer](https://jctoledo.github.io/blackbox/guides/lap-timer.html): record tracks, arm timing, and troubleshoot missed starts. - [Sensor fusion](https://jctoledo.github.io/blackbox/guides/sensor-fusion.html): frames, prediction, correction, and limitations. - [How Blackbox works](https://jctoledo.github.io/blackbox/guides/engineering-review.html): architecture, timing, local data ownership, and verification. ## Capabilities and evidence Blackbox supports circuit/stage timing, interpolated fresh-fix crossings, position-matched references, recording-backed Drive duration/partial GPS distance, saved speed and sustained-force summaries, CSV export, and software-validated backup/restore. Configuration targets are 25 Hz GPS with NEO-M9N (5 Hz with NEO-6M) and configurable WT901 output up to 200 Hz. No project subscription or cloud account is required. - [Build or buy comparison](https://jctoledo.github.io/blackbox/guides/comparison.html): documented capabilities alongside RaceBox, RaceChrono Pro, and Performance Box Touch; cost assumptions and proposed features are separate from delivered features. ## Accuracy and status Blackbox is in active development. Millisecond timestamps and interpolated crossings are not millisecond physical-accuracy claims. The estimator uses diagonal covariance, not a full covariance EKF. Synthetic tests and cross-compilation do not substitute for reference-timed driving or a real USB flash/boot test. Rates depend on configured hardware and measured processing cadence. This file is a convenient reading index, not a crawler directive or a guarantee of search or AI inclusion. - [Hardware acceptance checklist](https://jctoledo.github.io/blackbox/guides/hardware-validation.html): bench, USB, sensors, crossings, accuracy, and recording tests. - [Compatibility and accuracy FAQ](https://jctoledo.github.io/blackbox/guides/faq.html): supported configurations and explicit limits. - [Interactive dashboard demo](https://jctoledo.github.io/blackbox/demo.html): synthetic telemetry, not a measurement or accuracy demonstration. - [Experimental mount alignment](https://jctoledo.github.io/blackbox/guides/mount-alignment.html): signed GPS braking evidence, reviewed candidates, persistent save and physical limitations. - [GPS timestamp logging](https://jctoledo.github.io/blackbox/guides/gps-logging.html): receiver UTC, device parse times, bounded capture, export and offline interval analysis. - [Maths and hardware rates](https://jctoledo.github.io/blackbox/guides/maths-and-rates.html): interpolation, update-rate budgets, estimator limits, force estimates and calibration assumptions. - [Rolling intervals](https://jctoledo.github.io/blackbox/guides/rolling-runs.html): unit-specific 30–60 / 45–70 mph and 50–100 / 80–120 km/h receiver-time estimates, validity gates and evidence export; not validated drag timing. - [Build Blackbox](https://jctoledo.github.io/blackbox/guides/build.html): current C3 parts and signal mapping, mounting, bench checks and assembly photo journal. ## First build and measurements - [DIY GPS lap timer](https://jctoledo.github.io/blackbox/guides/diy-gps-lap-timer.html): parts, wiring gates, installation and first saved session. - [NEO-M9N ESP32 logger](https://jctoledo.github.io/blackbox/guides/neo-m9n-esp32-gps-logger.html): receiver/host timestamps, delivered cadence and export workflow. - [GPS timing accuracy](https://jctoledo.github.io/blackbox/guides/gps-lap-timer-accuracy.html): interpolation examples and a pending real measurement report. - [First drive](https://jctoledo.github.io/blackbox/guides/first-drive.html): concise NEO-M9N setup, parked baselines, ordinary-drive recording, exports and photo plan. - [Drive recording](https://jctoledo.github.io/blackbox/guides/drive-recording.html): no-track readiness, monotonic recording duration, partial receiver-speed GPS distance and recoverable checkpoints. - [Saved recording summary](https://jctoledo.github.io/blackbox/guides/recording-summary.html): qualified maximum speed, sustained half-second force estimates, saved-only scope, continuity and synthetic provenance; recomputed from retained rows after reload/restore.